Skip to main content
Monthly Archives

Novembre 2013

Calendario Natalizio

By Senza categoria

Video Tutorial:

For this project need:
. gift card
. baking paper

. pencil
. scissors
. sewing machine
.
white acrylic color
. ruler with numbers
 

preparation:
Step 1 : draw on the baking paper and cut out a heart. Dimensions of mine are 17×13, but you can choose the size  that    you prefer
Step 2 : basing on our hearts cut out the hearts from gifts wrapping paper
Step 3 : to give a vintage style to the heart, color the  front side in not too much accurate way
Step 4 : with a ruler with the numbers draw numbers on the hearts, from 1St to 25.
You can also do it with free hand
Step 5 : start to sew the back  to front of the heart
Step 6 : before to close at all put treats, some note or gift from the corner.
I ‘ve putted indications for gifts to open, as not all gifts enter into paper hearts
Step 7 : finish the seam. On the upper part cut a little hole with scissors to pass the wire.
I used special tools to define the hole .
Step 8 : hang all your little hearts on a wooden base and decorate.
07_Cal_nat 06_Cal_nat 05_Cal_nat 04_Cal_nat 03_Cal_nat 02_Cal_nat 01_Cal_nat

Per questo progetto serve:
. carta regalo
. carta da forno
. matita
. forbici
. macchina da cucire
. color acrilico bianco
. righello con i numeri

Preparazione:
passo 1: sul carta da forno disegnare e ritagliare un cuore . Dimensioni del mio cuore sono 17×13, ma voi potete fare le misure che preferite
passo 2: basando sul nostro cuore ritagliare altri cuori dal carta regalo
passo 3: per dare stile vintage colorare fronte del cuore nel modo non tanto accurato
passo 4: con un righello con i numeri disegnare numeri sopra il nostro cuore colorato. potete fare anche a mano libero
passo 5: iniziare a cucire retro-fronte del cuore
passo 6: quando rimarrà un angolino aperto,mettere dolcetti,bigliettino o qualche regalo. Io con i dolci ho messo indizi per i regali da aprire,visto che non tutti regali entrano dentro i nostri cuoricini
passo 7: finire la cucitura e con i forbici sforare parte superiore del cuore per far passare filo. Io ho usato strumenti speciali per definire il taglio.
passo 8: appendete tutti vostri cuoricini sul una base di legno e decorate a piacere.

 

For this project need:
. gift card
. baking paper

. pencil
. scissors
. sewing machine
.
white acrylic color
. ruler with numbers

preparation:
Step 1 : draw on the baking paper and cut out a heart. Dimensions of mine are 17×13, but you can choose the size that you prefer
Step 2 : basing on our hearts cut out the hearts from gifts wrapping paper
Step 3 : to give a vintage style to the heart, color the front side in not too much accurate way
Step 4 : with a ruler with the numbers draw numbers on the hearts, from 1St to 25.
You can also do it with free hand
Step 5 : start to sew the back to front of the heart
Step 6 : before to close at all put treats, some note or gift from the corner.
I ‘ve putted indications for gifts to open, as not all gifts enter into paper hearts
Step 7 : finish the seam. On the upper part cut a little hole with scissors to pass the wire.
I used special tools to define the hole .
Step 8 : hang all your little hearts on a wooden base and decorate.

Ghirlanda Con La Felpa Riciclata

By Blog, Handmade Eco, Senza categoria, Tutorial

 

Costo: 1€
Tempo: 2-3 ore
Difficoltà: Facile

 Materiale occorrente:
               01

 – Vecchia felpa

02_01
– Mezzo anello di polistirolo
– Forbici
– Colla al caldo

  • Passo 1 :  Ritagliare la vecchia felpa in piccoli cerchietti

0304

  • Passo 2 :  Tagliare cerchi a  spirale

05

  • Passo 3 :  Iniziare dal lato esterno e rotolare interno tessuto intorno

07 06_01 06_02

  • Passo 4 :  Con la colla al caldo incollare bocconi del tessuto sul Mezzo Anello di polistirolo una                      vicino l’altro

10 (1) 09 (1) 11 (1)

Questo mio articolo è stato pubblicato nella rivista “Riciclo Creativo” . Collaborazione con Creative&co
Riciclo-Recupero3-29_Layout 1

Segnalibro in pochi minuti

By Blog, Tutorial


For this project you will need:
. felt
. baking paper
. pencil
. scissors
. hot glue

vlcsnap-2013-11-05-23h36m28s67

Preparation:
Step 1: basing on the corner of the book draw a heart
Step 2: cut out two hearts from the felt

vlcsnap-2013-11-05-23h25m08s139

vlcsnap-2013-11-05-23h25m19s6

Step 3: with hot glue attach the corners of the hearts

vlcsnap-2013-11-05-23h26m05s195

Step 4: With a felt of different color cut out little heart or some other decoration and attack to big heart

SEGNALIBRO_CUORE_04

The bookmark is ready!

SEGNALIBRO_CUORE_03

vlcsnap-2013-11-05-23h26m35s251

vlcsnap-2013-11-05-23h25m40s224

SEGNALIBRO_CUORE_05
Per questo progetto serve:
. feltro
. carta da forno
. matita
. forbici
. colla al caldo

SEGNALIBRO_CUORE_05

Preparazione:
passo 1: basando sul angolo del libro disegnare un cuore
passo 2: ritagliare due cuori di feltro
passo 3: con la colla al caldo attaccare gli angoli dei cuori
passo 4: con un feltro di diverso colore ritagliare cuoricino o qualche altra decorazione e attaccare al grande cuore

SEGNALIBRO_CUORE_01 SEGNALIBRO_CUORE_03 SEGNALIBRO_CUORE_04Il segnalibro è pronto!
For this project you will need:
. felt
. baking paper
. pencil
. scissors
. hot glue

vlcsnap-2013-11-05-23h36m28s67

Preparation:
Step 1: basing on the corner of the book draw a heart
Step 2: cut out two hearts from the felt

vlcsnap-2013-11-05-23h25m08s139

vlcsnap-2013-11-05-23h25m19s6

Step 3: with hot glue attach the corners of the hearts

vlcsnap-2013-11-05-23h26m05s195

Step 4: With a felt of different color cut out little heart or some other decoration and attack to big heart

SEGNALIBRO_CUORE_04

The bookmark is ready!

SEGNALIBRO_CUORE_03

vlcsnap-2013-11-05-23h26m35s251

vlcsnap-2013-11-05-23h25m40s224

SEGNALIBRO_CUORE_05

Collana con la Pasta

By Blog, Handmade Eco, Tutorial


Necklace with pasta  For this project is needed: . remnants of elastic fabric or old T-shirt , . pasta . acrylic paint and brush . needle and thread . scissors . hot glue preparation: Step 1 : color 2 pieces of pasta into black and other 4 in white (or any color to your pleasure)
Step 2 : cut the fabric diagonally. We need 3 strips for any braid
Step 3 : Attach the strips on hard surface with the the paper scotch Step 4 : Make the braid. One 75 centimeters long , and other two 35 cm (at the end we can cut braid in excess)
Step 5 : at lateral ends of the braids attach the paper scotch, in order to pass easily inside of the pasta.
Step 6 : the ends of the long braid put two pieces of black pasta and attach to each other with hot glue

Step 7 : other four white pieces put on short braids and attach with each other
step 8 : put in a desired position above each-other the braids with pastas and first fixed with paper scotch for ease and then fix with a strip of fabric

The necklace is ready!

Collana di pasta  Per questo progetto serve: . scampoli del tessuto elastico o vecchia maglietta, . pasta . colori acrilici e pennello . ago e filo . forbici . colla al caldo Preparazione: passo 1: colorare 2 pezzi di pasta in nero e altri 4 in bianco (o qualsiasi colore a vostro piacimento)
passo 2: tagliare il tessuto in diagonale . Servono 3 strisce
passo 3: fissare sulla superficie rigida con lo scotch di carta passo 4: fare la treccia. Uno lungo di 75 centimetri, e due di 35 centimetri (alla fine possiamo tagliare treccia in eccesso)
passo 5: fissare lati delle trecce con lo scotch di carta in modo di far passare facilmente al interno della pasta.
passo 6: sulle estremità della treccia lunga infilare due pezzi di pasta colorata in nero e fissare con colla al caldo

passo 7: altri quattro pezzi bianchi infilare nelle trecce corte e fissare una con l’altro
passo 8: mettete nella posizione desiderata una sopra l’altro le trecce con le paste e prima fissate con scotch di carta per facilità e poi fissate con una striscia di tessuto.

La collana è pronta!